Gorman-Rupp Pumps 02C3-X1.5 1P 262109 and up - Manual (Page 19)

OM-01095 0 SERIES
MAINTENANCE & REPAIR PAGE E - 1
PUMP MAINTENANCE AND REPAIR - SECTION E
MAINTENANCE AND REPAIR OF THE WEARING PARTS OF THE PUMP WILL MAINTAIN PEAK
OPERATING PERFORMANCE.
T‐5‐9‐77
STANDARD PERFORMANCE FOR PUMP MODELS 02C3-X1.5 1P
Based on 70_ F (21_ C) clear water (corrected to
.80 specific gravity) at sea level with minimum suc­
tion lift. Since pump installations are seldom identi­
cal, your performance may be different due to such
factors as viscosity, specific gravity, elevation, tem­
perature, and impeller trim.
If your pump serial number is followed by an “N”,
your pump is NOT a standard production model.
Contact the Gorman‐Rupp Company to verify per­
formance or part numbers.
Pump speed and operating condition
points must be within the continuous per­
formance range shown on the curve.