Gorman-Rupp Pumps 02K3-E2 1P 280663 and up - Manual (Page 7)

0 SERIES OM-01164
PAGE A - 2 SAFETY
tional Electric Code and all local codes.
If there is a conflict between the instruc­
tions in the manual accompanying the
unit and the National Electric Code or
the applicable local code, the National
or local code shall take precedence.
The electrical power used to operate
this pump is high enough to cause inju­
ry or death. Obtain the services of a qu­
alified electrician to troubleshoot, test
and/or service the electrical compo­
nents of this pump.
Use lifting and moving equipment in
good repair and with adequate capacity
to prevent injuries to personnel or dam­
age to equipment. Suction and dis­
charge hoses and piping must be re­
moved from the pump before lifting.
Pumps and related equipment must be in­
stalled and operated according to all na­
tional, local and industry standards.