NXG Technology NX-VM80 Impedance Matching Volume Control - Manual (Page 2)

One-Year Limited Warranty
If this volume control proves to be defective in materials or workmanship within one year
from the date of the original customers purchase, we will, at our option, repair or replace the
defective product.
Disclaimer
The warranty stated herein is in lieu of all other warranties expressed or implied
including merchantability and fitness for particular purpose and all other liabilities and oblig-
ations of NXG Technology, all of which are expressly disclaimed. NXG Technology has not
made and does not hereby make any other representation, warranty or covenant with respect
to the condition, quality, durability, design, operation, capacity, fitness for use or suitability of
this volume control.
Exclusion of Certain Damages
NXG Technology’s liability for any defective product is limited to repair or replacement of the
product at our option. NXG Technology shall not be liable for incidental or consequential dam-
ages of any kind or character because of product defects. Some states do not allow limita-
tions on how long an implied warranty lasts and/or do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations and exclusions may not apply.
This Warranty Does Not Cover
Damage caused by abuse, accident, misuse, negligence or improper operation or installation.
Products that have been altered or modified. Any product whose serial number has been
altered, defaced or removed. Normal wear and maintenance. Damages caused by shipping
(All claims for shipping damages must be made with the carrier)
Warranty Service
All warranty repairs must be accompanied by the original bill of sale. No other document is
acceptable or required.
Mounting (Fig. 3)
Install the completed assembly into a single gang electrical work box, approximately 18 cubic inches or greater. An open
back electrical box or plaster ring may be more convenient to work with. The volume control insert and the decorative
plate are packed separately in the carton. Mount the NX-VM80 in the electrical box using the screws provided.
Note: Avoid mounting the NX-VM80 next to AC lines or dimmers.
Operational Check
After making all connections, check for proper operation. Switch the system to the ON position. Using either the television
or music, slowly increase the volume on the amplifier/receiver to mid position. Now, slowly advance the volume control
knob on the NX-VM80, clockwise from its minimum position towards its maximum position. You should hear sound ema-
nating from the speakers, increasing in volume as you rotate the volume control knob through its twelve steps. Select the
level of sound that is most pleasing to you. If no sound is heard from any or all speakers, switch the system OFF imme-
diately and check for open or loose connections, wrong polarity or shorts in the wires.
NXG Technology • 16648 North 94th Street • Scottsdale, AZ 85260 • Phone: 1-800-733-0008
Fig. 3