SM Pro Audio MBC502: System 500 Multi Band Optical Compressor - Manual (Page 8)

SM Pro Audio Page 8 of 11 MBC502 manual
8 Let’s play
The MBC502 opamps are in DIP8 sockets, this simply means that users can interchange between
different types of opamps to achieve different results, and we would be happy if you report the
results to us as well. Please note that any damage caused in this process cannot be covered under
warranty.
9 Specs
Audio Inputs
Mic input connector XLR balanced
Impedance 3k Ohms
Mic input gain 10dB to 60dB
Phase reversal switchable
Phantom power + 48V, switchable
Instrument input con. 1/4“ jack unbalanced
Instrument input gain 0dB to 45dB
Audio Outputs
Connectors XLR & 1/4“ jack
Type Balanced & Unbalanced
Amplitube Frequency Response
Line in 6Hz to 40kHz within 1dB
Compressor
Photoresistive servo operated
Ratio Variable 1:1 - 10:1
Attack 1 ms – 100 ms
Release 0,1 s – 3 s
Filter
Xover: 70Hz – 3.6kHz
Slope: 24 dB
Meter
VU meter -20 dBu – + 3 dBu
Performance
THD (Unweighted) 1kHz 0.022%
Power Supply
198ma from standard 500 series power chasis.
SM ProAudio is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or shown.