Kendall Howard WMTC-M Thin Client/LCD Wall Mount - Manual (Page 2)

Tools Needed:
Included:
2
Screw Driver
(1x) Wall Mount Base (1x) Monitor Mount
(4x) M4 x 12 Screw (4x) M4 x 8 Screw
Assembly - Step 1:
Fasten Thin Client to Back of Wall Mount Base using
Screws Provided. Mount Base to Wall using Appropriate
Hardware (not included). Fasten to Secure Surface, such
as Wall Studs or use Wall Anchors.
Assembly - Step 2:
Assembly - Step 3:
3
Fasten Monitor to Monitor Mount using Monitor
Manufacturer’s Screw Specifications.
Attach Monitor Mount to Wall Mount Base. Align Keyholes
with Fastening Pins. Slide Monitor Mount Down to Secure.