Andrew James AJ000079 90 Day Pet Feeder - Manual (Page 5)

5
Getting started

Open the battery door (under the unit).

Insert four D-size alkaline batteries into the battery tray. DO NOT use old or
cheap carbon batteries.

Close the battery door and switch on the feeder. The ON switch is next to the
battery door (under the unit).

The feeder will cycle once until ”12:00” is flashing on the LCD display.

You now have 90 seconds to set the current time in order for the feeder to
work properly. If longer than 90 seconds passes then (1 :07) will be displayed
on the LCD. Simply turn the switch to Off, wait 1 minute, then repeat from
step 3.
PM
TIMER
Digit-1 Digit-2 Digit-3 Digit-4
CLOCK
Control Panel LCD Display