Andrew James AJ000038 Candy Floss Maker - Manual (Page 9)

9
Cleaning instructions
a) Make sure the unit is unplugged and is cool before cleaning.
b) After cooling, remove the extractor head assembly by pulling it straight up.
Unlock the bowl by turning it clockwise and removing it. (Figure B,C ,D).
Wash both parts in warm water, rinse and dry thoroughly.
c) Use a slightly damp, non-abrasive sponge or non-abrasive towel to wipe
clean the outside of the unit and then wipe it with a non-abrasive towel to
dry it.
d) The candy floss maker breaks down to the base, bowl and extractor head for
easy cleaning (Figure E).
Electrical information
Please note:
It is extremely important that the wires or cores in the flex are connected to the
correct terminals in the plug. If the colour of the mains lead of the appliance does
not correspond with the coloured markings identifying the terminals in your plug
proceed as follows:

The Live (Brown) wire
connects to the right-
most live (L) terminal
nearest to the fuse.

The Neutral (Blue) wire
connects to the left-
most neutral (N)
terminal.

The Earth (Green and
Yellow) wire connects
to the central, top most
earthed (E) terminal.