Andrew James AJ000404 7 Hole Doughnut Maker User Manual
Page 10
10
Electrical information
Please note:
It is extremely important that the wires or cores in the flex are connected to the
correct terminals in the plug. If the colour of the mains lead of the appliance does
not correspond with the coloured markings identifying the terminals in your plug
proceed as follows:
The Live (Brown) wire
connects to the right- most
live (L) terminal nearest to
the fuse.
The Neutral (Blue) wire
connects to the left-most
neutral (N) terminal.
The Earth (Green and
Yellow) wire connects to the
central, top most earthed (E)
terminal.
Warning:
If the appliance is double insulated indicated by the double insulated symbol:
it should not have an earth wire or earth connection.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same identical rating as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualified electrician.
Please note after replacing the fuse, ensure that the cover is correctly fitted back
onto the plug. Never attempt to run the appliance if the plug does not have a
cover. If a moulded plug is fitted and has to be removed take great care in disposing
of the plug and severed cable, it must be destroyed to prevent it from engaging
into a socket.