Andrew James AJ000414 12 Doughnut Maker User Manual

Page 8

Plug

The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used.

When changing the fuse always replace it with a fuse that is of the same identical
rating as the original. If you are unsure about which plug or fuse to use, always
refer to a qualified electrician.

Please note after replacing the fuse, ensure that the cover is correctly fitted back
onto the plug. Never attempt to run the appliance if the plug does not have a cover.
If a moulded plug is fitted and has to be removed take great care in disposing of the
plug and severed cable, it must be destroyed to prevent it from engaging into a
socket. If the supply cord is damaged it must be replaced by a service agent or a
similarly qualified person in order to avoid a hazard.

All of our electrical appliances conform to pre-existing EC Directives 2006/95/EC
(Low Voltage Directive) and 2004/108/EC (EMC Directives).

For further information please visit http://www.esc.org.uk/industry/product-
safety/product-testing-screening/kitchen-appliances/

version 2