Andrew James AJ000304 Potato Cutter - Manual (Page 2)

2
How to use the appliance:
1. Place the chip cutter on a smooth, flat surface. Ensure the appliance grips
the work surfaces firmly.
2. Lift up the handle and insert a medium sized potato into the appliance.
Please cut the potato to size before placing it in the chip cutter. Maximum
size of the potato: 5 ½ cm (H) x 8cm (W).
3. Bring down the handle to force the potato through the front grid.
Warning: Do not place your fingers in the chip cutter when pressing down on the
handle.
Changing the Grids
Front grid
1. Lift up the handle.
2. Rotate the front clip upwards.
3. Lift the grid out of the appliance.
4. Place the new grid into the appliance with the lip facing backwards.
Back grid
1. Lift the handle of the appliance upwards.
2. Unclip the lock by rotating it clockwise.
3. Remove the black back grid.
4. Place with the new grid so that the protrusions fit into the slots.
5. Rotate the lock clockwise to lock it into place.
Care instructions

Wash all parts of the appliance thoroughly after each use.

Do not use abrasive solvents or cleaning agents when cleaning the appliance.

Always dry the appliance thoroughly after cleaning.

Store the appliance in a dry and clean place.