Andrew James AJ000475 Retro Blender - Manual (Page 2)

2
Contents page
Important safeguards Page 3
Appliance specific safety instructions Page 4
Appliance components illustration Page 5
Assembly of the glass jug Page 6
Inserting the glass jug Page 6
Using the appliance Page 6
Table of speed settings Page 7
Helpful tips Page 7
Cleaning Page 8
UK and EU Guarantee Page 9
Electrical information Page 10
Disposal of the appliance Page 12
11
Electrical Information
Please note:
It is extremely important that the wires or cores in the flex are connected to the
correct terminals in the plug. If the colour of the mains lead of the appliance does
not correspond with the coloured markings identifying the terminals in your plug
proceed as follows:
 The Live (Brown) wire
connects to the right-
most live (L) terminal
nearest to the fuse.
 The Neutral (Blue) wire
connects to the left-
most neutral (N)
terminal.
 The Earth (Green and
Yellow) wire connects
to the central, top most
earthed (E) terminal.
Warning:
If the appliance is double insulated, indicated by the double insulated symbol:
it should not have an earth wire or earth connection.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same identical rating as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualified electrician.
Please note after replacing the fuse, ensure that the cover is correctly fitted back
onto the plug. Never attempt to run the appliance if the plug does not have a cover.
If a moulded plug is fitted and has to be removed take great care in disposing of the
plug and severed cable, it must be destroyed to prevent it from engaging into a