Andrew James AJ000350 Digital Food Dehydrator - Manual (Page 7)

7
Setting up your food dehydrator
Stacking the trays
Before loading the trays with food it is a good idea to make sure that they are all
aligned correctly by stacking them up near the preparation area. The narrow side of
the tray is always at the top.
Trays have alignment arrows cast into the handle. The arrows should be visible on
top of the tray handles. Incorrectly stacked trays will hinder the drying process.
Once the trays are all correct side up you can stack them in two different ways.
Depending on the thickness of the food you can change the stacking height by
simply rotating a tray 180˚c to change it to either tall or short stacked.
Any combination of stacking can be used to accommodate the foods being dried. An
example would be a short tray stack for banana chips and a tall tray stack for large
strawberries.
Set the trays in place so that all the arrows on the
handles are visible on the top of the handles.