beautypg.com

Set-up, Get lasting value, Special instructions accessories – Ultimate Support TS-70B User Manual

Page 2

background image

3

set-up

special

instructions

accessories

1

2

3

4

5

GET
LASTING
VALUE!

Safe & Secure
Supports more weight
than other lightweight
stands; locking pin
for absolute speaker
security.

Truly Portable
Quickly folds into an
ultra-slim, lightweight
unit.

Versatile & Reliable
Includes integrated
socket adapter and foot
caps that won’t fall off.

Limited Lifetime
Warranty
Constructed of the finest
materials and backed
by our award-winning
customer support (see
Warranty Information on
pg. 4 for details).

STEP 5

To lower speaker, remove the safety

pin from the slot. Slowly loosen the

hand knob. Use caution and slowly

lower the upper telescoping tube.

Tighten hand knob and remove

speaker cabinet.

1. Occasionally clean the stand
with a damp cloth or non-abrasive
cleaner. Do not lubricate or use
silicone spray on the center tube.

2. When loading the tripod, ONLY
add the speaker when the tripod is
in a fully upright position (all legs on
the floor).

3. Do not drag the Tripod Speaker
Stand while it is loaded; this could
cause breakage of the fittings and
result in damage to the stand.

4. When supporting equipment,
check that the telescoping collar is
securely tightened and the safety
pin is inserted into slot on upper
telescoping tube.

5. Always release the collar with
caution and stand clear of load.

STEP 1

Loosen leg fitting hand knob.

STEP 2

Slide leg fitting down to maximum

diameter of leg spread (leg braces

should be parallel to the floor. Tighten

hand knob.

CAUTION: Do not over tighten

hand knob; usually two turns

is enough. Also, do not store

in tightly locked position.

STEP 3

Remove safety pin from slot on upper

telescoping tube. Loosen hand knob

on telescoping collar and raise center

tube 6-10”. Retighten hand knob.

STEP 4

Select the correct size socket adapter.

Put speaker cabinet on top. Slowly

loosen the hand knob and raise the

cabinet to desired height. Tighten

hand knob. Insert safety pin into slot

on the telescoping tube.

Zippered Tote Bags

Speaker Stand Mounting Bracket

Speaker Stand Socket
Mounting Bracket

Heavy-duty, padded, zippered Tote Bags

BAG-90 (#15691)

Holds one TS-70B Speaker Stand
10.5” x 49.5” (267 mm x 1257 mm)

BAG-90D (#15693)

Holds two TS-70B Speaker Stands
14.5” x 49.5” (368 mm x 1257 mm)

BMB-200K (#10766)

External bracket securely mounts any
speaker cabinet with a flat bottom on an
Ultimate Support speaker stand.

TSM-150MK (#13421)
TSM-138MK (#13425)

Internal metal bracket securely mounts any
speaker cabinet with a flat bottom on an
Ultimate Support speaker stand.

2