Ultimate Support V-Stand Pro VS-88B - Manual (Page 2)

1. Lay stand on floor in folded position. 2. Separate both legs outward until they stop.
3. Secure legs in open position with locking pins. 4. Pull vertical struts upward to a vertical position and
spread them to their open position.
5. Move support arms into their horizontal position by
swinging them up and over the vertical struts.
6. Secure arms in horizontal position with locking pins.
STEP 3
STEP 2 STEP 1
STEP 4
STEP 5 STEP 6
For safety’s sake, be sure to adjust
V-Stand
® Pro height ONLY when
keyboard is not on stand.
1. Pull, or rotate, locking pin collar out to release inner strut.
2. Raise or lower inner strut to desired height and push, or rotate,
locking pin collar into locking position.
3. Repeat steps 1-2 on opposite inner strut. NOTE: Make sure
height settings match on both inner struts before placing
keyboard on V-Stand® Pro!
STEP 2
STEP 3
3 2
V-STAND ® PRO SETUP INSTRUCTIONS HEIGHT ADJUSTMENT
STEP 1