Gb 5, Maintenance, Problems and solutions – Imetec BS2 200 User Manual
Page 7
GB
5
noTE
To weigh yourself again, step off the scales and wait for the weight to disappear from the display
and and then step back on the scales.
The weight scales switches off automatically 10 seconds after being switched on.
We recommend removing the batteries if you do not intend to use the machine for a long period
of time.
MAInTEnAnCE
CLEAnInG
ATTEnTIon!
Do not use acid, abrasive, corrosive or chemical solvents.
Clean the glass surface using a soft damp cloth.
ProBLEMS AnD SoLuTIonS
There are no parts that can be repaired by the user. Should one of the problems indicated
occur, adopt the proposed solution.
Problem
Possible cause
Solution
The display shows the
symbols below:
Flat battery (the scales
will switch off within a few
seconds).
Change the batteries.
The display shows the
symbols below:
Excessive weight on the
scales.
Remove the weight from the
scales.