Imetec ECO BL - Manual (Page 15)

GB
HOW TO CLEAN THE LID (1), THE JUG (2)
AND THE BLADE UNIT (3)
• Lift the jug (2) from the motor unit (4) [Fig B].
• Remove the lid (1) from the jug (2) [Fig C].
• Turn the ring (3c) anticlockwise to remove it from the jug (2) [Fig D].
• Remove the blades (3b) and the gasket (3a) from the jug (2) [Fig E].
• The lid (1), the jug (2) and the blade unit (3) may be cleaned as follows:
- by hand, with water and a detergent;
- in the dishwasher, making sure the water’s maximum temperature does not exceed 60°C.
CLEANING THE MOTOR UNIT (4)
• Clean the motor unit (4) and the power supply cable (6) with a damp and well squeezed
sponge.
USE
ATTENTION!
• Do not use the appliance with no ingredients in it.
• Do not use the appliance with solid ingredients.
• Do not introduce more than 800 ml of ingredients.
• Always close the jug (2) with the lid (1) when the appliance is in
operation.
• Operation time must be under one minute.
• Before repeating this cycle let the appliance to cool down completely.
• Do not leave any food inside the container (8) beyond the time
required for preparation.
• Place the jug (2) on the motor unit (4) [Fig F].
• Insert solid ingredients in the jug (2), with a high content of liquid ingredients.
• Close the jug (2) with the lift (1) [Fig G].
• Insert the electric plug (6) in the socket.
• Start the blender by pressing the on/off switch button (5).
• Stop the blender by releasing the on/off switch button (5).
• If necessary, pour in additional liquid via the lid’s hole (1) [Fig H].
10