Imetec PROFESSIONAL SERIE BL - Manual (Page 13)

IT
7
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
Look at Figure [A] in the illustration section to check the content of the packaging. All figures
are found in the inside pages.
1. Lid.
2. Jug.
3. Blades.
4. Gasket.
CLEANING BEFORE FIRST USE
• Unpack the appliance.
• Wash the removable components: lid (1), jug (2), blades (3) gasket (4) by hand or in the
dishwasher.
• In the dishwasher, make sure the maximum temperature of the water does not exceed
55°C.
ASSEMBLY
ATTENTION!
• Do not use the appliance with no ingredients in it.
• Do not introduce more than 800 ml of ingredients.
• Always close the jug (2) with the lid (1) when the appliance is in operation.
• Continuous operation must not exceed 3 minutes. Before repeating this
cycle, let the appliance cool down for one minute.
• Do not leave any food inside the jug (2) beyond the time required for
preparation.
• Place the appliance on a flat and firm surface.
• Place the gasket (4) onto the blade plate (3) [Fig. B].
• Insert the blades (3) inside the ring nut (5) [Fig. C].
• Turn the ring nut (5) clockwise onto the jug (2) [Fig D].
• Insert the jug (2) onto the motor unit (7) [Fig. E].
• Add the fruit or vegetables into the jug (2) with a high percentage of liquids.
• Close the jug (2) with the lid (1).
OPERATION
The on/off control (8) has the following two positions:
0 Appliance OFF. 2 High speed.
1 Low speed. P Pulse function to add volume to the processed contents.
The LED (6) lights up in positions 1-2-P.
USE
Proceed as follows after having assembled the appliance:
• Insert the plug in the socket.
5. Ring nut.
6. LED.
7. Motor casing.
8. On/off control.
GB
MI000955_multi.indd 7 6/26/12 3:06 PM