Imetec DOLCEVITA BL4 - Manual (Page 8)

6
GB
7. Before cleaning or servicing the appliance, disconnect it from the mains by removing the plug.
8. Should the appliance break down and/or fail to work properly, turn it off and do not tamper with it. If it
needs repairing, take it to an authorised IMETEC Service Centre.
9. Do not attempt to replace the power cord. If it is damaged or needs replacing, contact an authorised
IMETEC Service Centre.
10. Should you decide not to use the appliance any more, make it inoperative by cutting the power cord
after removing the plug from the socket. We also recommend making all potentially dangerous parts of
the appliance harmless, particularly for children who might be tempted to play with it.
11. This appliance should not be used by children or persons with partially reduced physical, sensorial
or mental faculties, and in any case not without specifi c knowledge and experience, or without the
supervision or instructions for use provided by a responsible person.
12. Children must not be allowed to play with the appliance.
GENERAL INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES [Fig. Z]
Please consult Figure [Z] in the image section to check the content of the packaging.
All fi gures can be found on the inside pages of the cover.
1 Lid 6 Blade assembly
2 Glass jar 6a Stainless steel blades
3 Motor unit 6b Gasket
4 Power cord 6c Ring nut
5 Speed selector
SPEED SELECTOR
The blender has 2 speeds selection and a pulse mode.
POSITION FUNCTION
0 Off / Stop
1 Low speed setting
2 Maximum speed setting
P Pulse action setting
This setting creates a burst of power for instant control. The Pulse operates only as long
as the selector is held at position “P”. The motor stops when the selector is released.