Cleaning and maintenance, Problems and solutions, Gb 11 – Imetec WELLNESS JE User Manual
Page 13
USE
Proceed as follows once the installation is complete:
• Insert the plug into the socket.
• Activate the appliance by rotating the speed knob (11) to position 1 or 2.
• Insert the fruit or vegetables into the opening of the lid (2).
• Press the fruit or vegetables with the food pusher (1) [Fig. H].
• Once pressed, turn the appliance off by rotating the speed knob (11) to position 0.
• Remove the plug from the socket.
• Wait for the stainless steel filter (4) to stop completely before opening the safety handle
(7).
• Pour the juice into a glass.
CLEANING AND MAINTENANCE
After having used the appliance, it must be immediately cleaned in order to prevent the food
from clogging the stainless steel filter (4) once it dries.
• Remove the plug from the socket.
• Wait for the stainless steel filter (4) to stop completely before opening the safety handle
(7).
• Wash the removable parts: food pusher (1), lid (3), juice chute (5), juice container (8),
froth separator (9) and the pulp container (12) by hand or in the dishwasher.
• Make sure the maximum water temperature in the dishwasher does not exceed 60°C.
• The stainless steel filter (4) is only to be washed by hand, under running water, using a
brush normally used for dishes.
• Clean the motor unit (10) with a well-wrung moist sponge.
PROBLEMS AND SOLUTIONS
Should one of the problems indicated occur, adopt the proposed solution:
Problem
Solution
The appliance does not work.
Verify that the safety handle (7) is
inserted correctly [Fig. F].
The juice is not dispensed properly.
Verify that the stainless steel filter (4) is
not clogged. If so, clean it.
The stainless steel filter (4) is not easily
cleaned.
Place it in hot water with dishwashing
liquid for 10 minutes before cleaning it.
The juice chute (5), the lid (3) and the food
pusher (1) are stained.
Any stains are due to the carotenoids or
colour in fruit and vegetables and do not
constitute a manufacturing defect.
GB
11