Imetec BELLISSIMA B15 50 - Manual (Page 14)

USEFUL ADVICE
The quick understanding of the modes of use of the hair
straightener will allow establishing the exact application time
for obtaining the desired effect.
• Ensure the hair is dry, clean and without any trace of
hairspray, hair mousse or gel.
• Comb the hair ensuring there are no knots. Start
straightening from the nape of the neck, proceed on the
sides and finish on the forehead.
• During use, when the plates heat and cool, position the
appliance on a smooth and heat resistant surface.
• While straightening, be careful not to near the plates too
much to the sensitive parts of the face, ears, neck or head.
• Leave the plates cool down completely when finished,
before putting them away.
ATTENTION!
After having finished using the hair straightener,
ensure it has completely cooled down before
putting it away.
Never wrap the power supply cord (3) around
the appliance.
USE
PREPARING THE HAIR
• Wash hair as normal and comb removing knots.
• Dry the hair and brush from the roots to the ends.
USER INSTRUCTIONS
• Connect the power cord (3) to the mains.
• Slide the button
(4) to the ON position in line with the
symbol. The functioning LED (5) starts to flash.
• Rotate the temperature adjustment wheel (6) to set
the desired temperature between 140°C and 230°C,
depending on the type of hair and the desired effect; the
temperature can be adjusted at any time by rotating the
wheel (6) clockwise (to increase the temperature) or anti-
clockwise (to decrease the temperature).
• The functioning LED (5) lights up red until the plates reach
the set temperature. Once the set temperature is reached,
the functioning LED (5) remains on.
GB
12
MI000770.indd 5 11/10/2011 10:45:17 AM