Imetec BELLISSIMA CREATIVITY STYLE CREATOR B6 100 User Manual

Page 16

• press the

button (7). The LED display (3) goes on;

• select the desired temperature between 150°C and

230°C, depending on the type of hair and the desired
effect; the temperature can be varied at any time by
pressing + or - (8);

• after having selected the desired temperature, the

buttons lock can be activated by pressing the

button

(7) twice and quickly. This function prevents accidental
temperature changes while using the plate. The activation
of the buttons lock is signalled by the LED (4) going on;
the lock can be disconnected by pressing the

button

(7) twice once again;

• the LED display (3) flashes until the plates reach the set

temperature.
Once the temperature is reached, the LED display (3)
remains on;

• take a thin lock of hair, the same width of the plate and

place it between the two plates;

• with one hand keep the lock of hair tensioned and with

the other slide the plate closed from the roots down to
the points.
In order to discover the numerous methods and effects
that can be achieved using the straightener, consult the
Easy Styling Guide.

• once hair styling is completed, switch-off the appliance

by keeping the

button (7) pressed and disconnect the

appliance from the socket.

Note: It is possible that steam develops during
straightening; this is excess humidity in the hair that
evaporates.

ADJUSTING THE TEMPERATURE
The hair straightener has an electronic temperature

adjustment system. This allows the plate temperature to be

adjusted according to the type of hair and the desired style.
150-160°C: recommended for thin hair
170-190°C: recommended for medium hair
200-230°C: recommended for thick hair

MI000525.indd 14

21/04/11 23.37