Imetec BELLISSIMA CREATIVITY STYLE CREATOR B7 500 User Manual

Page 16

uSER INSTRucTIoNS
• before inserting or removing the shells, ensure the plate

is cold;

• insert the shells (12, 13 or 14) making them slide on the

bodywork (2);

• connect the plug (9) to the mains;
• press the

button (5). The functioning LED (4) goes

on;

• select the desired temperature between 140°C and

230°C, depending on the type of hair and the desired
effect; the temperature can be varied at any time by
pressing + or - (7);

• after having selected the desired temperature, the

buttons lock can be activated by pressing the

button (5) twice and quickly. This function prevents
accidental temperature changes while using the plate.
The activation of the buttons lock is signalled by the LED
(3) going on; the lock can be disconnected by pressing
the

button (5) twice once again;

• the functioning LED (4) flashes until the plates reach the

set temperature. Once the temperature is reached, the
functioning LED (4) remains on;

• take a thin lock of hair, the same width of the plate and

place it between the two plates;

• with one hand keep the lock of hair taut and with the

other, slide the closed plate from the roots towards the
ends;

In order to discover the numerous methods and

effects that can be achieved using the plate, consult
the Easy Styling Guide.

• once hair styling is completed, switch-off the appliance

by keeping the

button (5) pressed and disconnect

the appliance from the socket.

Note: It is possible that steam develops during
straightening; this is excess humidity in the hair that
evaporates.

MI000549.indd 14

21/04/11 19.30