Imetec BELLISSIMA CREATIVITY B30 50 - Manual (Page 14)

• Once finished using, leave the plates to cool down
completely before putting them away.
attention!
after having finished using the hair straightener,
ensure it has completely cooled down before
putting it away .
never wrap the power supply cable around the
appliance .
use
PreParing tHe Hair
• Wash hair as normal and comb removing knots.
• Dry the hair and brush from the roots to the ends.
coMMissioning
After having removed the product from the packaging, release
the plates by turning the plates’ closing lock clockwise (5).
This mechanism can also be used every time the product
is to be put away with the plates closed. In this case, close
the two plates rapidly and turn the plate’s closing lock anti-
clockwise (5).
user instructions
• Connect the plug (6) to the power supply network.
• Press the (4) button to turn the plate on.
• Upon switch-on, the LCD display (1) goes on bringing the
minimum temperature back to 130°C.
• Select the wanted temperature in an interval between
130°C and 230°C, depending on the type of hair and the
effect wanted; the temperature can be varied by pressing
+ or - (3).
• The LED display (1) flashes until the plates reach the set
temperature: once the temperature is reached, the LCD
display (1) remains on.
• Take a thin lock of hair, the same width of the plate and
place it between the two plates.
• With one hand keep the lock of hair tensioned and with
the other slide the plate closed from the roots down to
the points.
gB
12