Hotpoint Ariston Aqualtis AQ93F 29X - Manual (Page 7)

EN
7
Wash options
Extra rinse
By selecting this option, the efficiency of the rinse is increased
and optimal residual detergent removal is guaranteed. It is
particularly useful for skin which is sensitive to detergents. We
recommend this option is used with a full load of washing, or
when a large amount of detergent is required.
! It cannot be used in conjunction with , , , , .
Easy Iron
By selecting this option, the wash and spin cycles will
be modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
! It cannot be used in conjunction with , , , , .
Super Wash
This option offers a high-performance wash due to the greater
quantity of water used in the initial phase of the cycle, and due
to the increased wash cycle duration, is particularly useful for the
removal of stubborn stains. It can be used with or without bleach.
If you desire bleaching, insert
the extra tray compartment
(3) into compartment 1. When
pouring in the bleach, be careful
not to exceed the “max” level
marked on the central pivot
(see figure).
To bleach laundry
without carrying out a full
wash cycle, pour the bleach
into the extra compartment 3,
select the “Rinse” cycle”
and activate the “Super Wash” option .
! It cannot be used in conjunction with , , , , ,
, , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy saving.
Use this cycle for lightly soiled garments.
! It cannot be used in conjunction with , , , , ,
, , , .
3
1
2
Wash cycles and options
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.
Table of wash cycles
Icon Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max. load
(kg)
Residual dampness
%
Energy consum- ption kWh
Total
water lt
Cycle
duration
Pre-
wash Wash Bleach
Fabric
softener
Cotton (2-3): lightly soiled whites and delicate colours. 40° 1200 -    9 53 0,85 76 182
Synthetics Resistant 60° 800 -    5 48 1,00 57 115
Synthetics Resistant (5) 40° 800 -    5 48 0,64 55 94
Whites 60° 1200 -  -  6 - - - 189
Coloureds (4) 40° 1200 -    6 53 0,98 88 115
Darks 30° 800 -  -  6 - - - 75
Shirts 40° 600 -    2,5 - - - 77
Duvets: for down-stuffed garments. 30° 1000 -  -  3,5 - - - 146
Bed&Bath for bedlinen and towels. 60° 1200 -    9 - - - 150
Rinse - 1200 - -   9 - - - 49
Spin and Pump out - 1200 - - - - 9 - - - 16
Anti allergy 60° 1200 -  -  6 - - - 206
Ultradelicates 30° 0 -  -  1 - - - 80
Wool: for wool, cashmere, etc. 40° 800 -  -  2,5 - - - 100
Mix 30': to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand).
30° 800 -  -  4 71 0,22 41 30
Cotton Prewash
(Add detergent to the relevant compartment).
90° 1200   -  9 53 2,01 101 205
Cotton (1): heavily soiled whites and resistant colours. 60° 1200 -    9 53 1,051 82 177
Cotton: heavily soiled whites and resistant colours. 90°C 1200 -    9 53 2,76 101 195
For all Test Institutes:
1) Test Programmes according to 1061/2010: set wash cycle with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test Programmes according to 1061/2010: set wash cycle with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
3) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
4) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.
5) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.