Xoro HSD 7150 - Manual (Page 51)

HSD 7150 11
Engl
ish
1. Connecting to an External Power Source
Connect the power adapter (supplied with the player) to the side input and to a wall
outlet. Do not use any other device otherwise specified by your dealer.
2. Putt off the DOOR OPEN button on the front side of the HSD 7150.
3. Open the protective cove. The cover opens to a maximum 135 degrees only, so
please do not try to open it any further.
4. Inserting a DVD disc. Align the center of the DVD disc with the center of the disc
guide. Press gently down on the DVD to snap the disc into place, then close the disc
cover.
5. Slide the side power switch to 'ON'.
6. Press
the PLAY button on the player face. In general, the DVD already inserted into
the player will start reading automatically when power is turned on.
7. The DVD player will immediately start rendering the DVD program.
8. When you want to stop, press the STOP button, it will return to the power-on logo.
9. To power off the unit, slide the ON/OFF switch to the right.
10. If you don’t use the player for a long time, please detach the device from the wall
outlet.
Quick Starting Guide