3 connecting the meter with the pc, Connect the meter to the pc with a usb cable, Switch on the meter – Xylem HL MKII MultiLab User User Manual
Page 5: 3 operation, 1 activating the user administration on the meter, Connect the meter to the pc, Start searching for the connected meter with ok, Connecting the meter with the pc, Activating the user administration on the meter, 3operation
M
ULTI
L
AB
®
U
SER
O
PERATION
ba76147d01
04/2013
5
2.3
Connecting the meter with the PC
A USB cable is required for this connection (type A - type B).
The
MultiLab User
program recognizes the suitable meters.
1.
Connect the meter to the PC with a USB cable.
2.
Switch on the meter.
3
Operation
3.1
Activating the user administration on the meter
1.
Connect the meter to the PC.
2.
Switch on the meter.
The meter displays the start window. A measured value is displayed if a
sensor is connected.
3.
Start the
MultiLab User
program from the start menu.
The
MultiLab User
window appears.
4.
If necessary, select a different language in the
Language
menu.
5.
If necessary, open the operating manual for the software in the
Help
menu.
6.
Start searching for the connected meter with
OK
.
As soon as a meter is recognized, you are prompted to enter an adminis-
trator password.