Xylem VFD Quick Start Safety Guidelines User Manual
Vfd controller hazard statements

This is a SAFETY ALERT SYMBOL. When you see this
symbol on the pump, the controller or in the manual, look
for one of the following signal words and be alert to the
potential for personal injury or property damage.
Warns of hazards that WILL cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause personal injury or
property damage.
NOTICE: INDICATES SPECIAL INSTRUCTIONS WHICH ARE VERY
IMPORTANT AND MUST BE FOLLOWED.
THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS PRIOR TO
PERFORMING ANY WORK ON THIS CONTROLLER.
MAINTAIN ALL SAFETY DECALS.
DANGER
WARNING
CAUTION
VFD Controller Hazard Statements
Controllers are not
designed for use
around swimming pools, open bodies
of water, hazardous liquids, or where
flammable gases exist.
Do not use GFCI input
power. This will cause
nuisance faults.
Disconnect and lockout
electrical power before
installing or servicing any electrical
equipment.
Electrocution hazard.
Controller Input Ground
Terminal (GND) and all exposed metal
piping, including pressure transducer
case, must be connected to the service
entrance ground terminal.
WARNING
WARNING
WARNING
WARNING
WARNING
All electrical work must
be performed by a
qualified technician. Always follow the
National Electrical Code (NEC), or the
Canadian Electrical Code, as well as
all local, state and provincial codes.
Code questions should be directed to
your local electrical inspector. Failure
to follow electrical codes and OSHA
safety standards may result in personal
injury or equipment damage. Failure
to follow manufacturer’s installation
instructions may result in electrical
shock, fire hazard, personal injury
or death, damaged equipment,
unsatisfactory performance, and may
void manufacturer’s warranty.
QUICK START GUIDE
IMS-HAZARD-1