Braun ST780 Satin Hair 7 - Manual (Page 11)

12
• For improved control when gliding along a strand, you may
stabilise the appliance by holding it with the other hand on
the cool touch points (1).
• You can create flicks at the hair ends by slowly turning the
appliance either outwards or inwards before releasing a
strand.
How to form loose curls and waves
– Clamp a thin strand at the roots,
– rotate the appliance half a turn so that the strand glides
through the styling plates and then over the active forming
area,
– then slowly move the appliance horizontally towards hair
tips. When pulling the appliance beyond the hair tips, the
strand will turn into curl.
Feedback
The SensoCare mode provides feedback on the
straightening performance after each stroke.
Speed (of stroke)
Has the stroke been
performed slowly
enough?
Right J Good, go on like this.
Fast K Move appliance more
slowly
Very Fast L Move appliance
slowly.
Moisture (level of
hair)
Is your hair evenly
dry?
Dry J Good, go on like this.
Damp K You will get better
results on evenly dry
hair. Wet L
In both SensoCare and Manual Mode, the screen
will show a hair dryer symbol if wet hair is detected
during styling. As a safety feature, the temperature
will decrease.
This means that you should dry your hair before straightening.
To deactivate the hair dryer symbol, push the center key.
After use
Turn off the appliance by pushing the center button for
2 seconds. The screen shows two options:
switch off
sleep mode
To switch off, select
Cancel...
and confirm with the center button.
The «cooling down» screen is shown provided the appliance
is still plugged in. When the temperature has dropped below
60 °C, the screen turns off and you can touch the appliance
without any risk.
Select if you want to resume styling later on. In sleep mode,
the temperature decreases to 100 °C. To quit sleep mode,
press any button. After 30 minutes in the sleep mode, the
appliance will switch off automatically.
Auto-shut-off
After 30 minutes of operation, the appliance switches
off automatically. The cooling down screen is shown as
long as the temperature is above 60 °C.
As long as the cooling down screen is shown, you can
resume styling: Press the center button and the previous
screen will be shown.
When the screen has turned off, you can touch the appliance
without any risk.
92064243_ST780_S6-104.indd 12 12.03.12 11:04