Acer T272HL - Manual (Page 13)

EN-12
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1
1-2
Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
Connect Digital Cable (Only Dual-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer’s port.
1-3 Connect HDMI Cable (Only HDMI-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
Connect the USB Cable(Optional)
3.Connect the Audio Cable(Only Audio-Input Model)(Optional)
4. Connect pow er adapter and power cord
Connect the pow to the monitor, then to
a properly grounded AC outlet.
5. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
6. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
2. 2-1
2-2 Connect the USB 3.0 cable to port for fast charge.
er adapter and power cord
3 2-1 1-2 1-1
4
1-3
1-1 2-1 1-2 1-3 3 4
HDMI
HDMI
DVI
DVI
VGA
VGA
USB
USB
USB3.0 port
-supporting fast charge 2-2
2-3 2-2
USB3.0 port 2-3
2-3 Connect the USB 3.0 cable to port.