Acer H6500 - Manual (Page 30)

20
En
gl
ish
Image
Projection Front
• The factory default setting.
Ceiling
• When you select this function, the projector inverts the image for
ceiling-mounted projection.
Rear
• When you select this function, the projector reverses the image so
you can project from behind a translucent screen.
Rear-Ceiling
• When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
Aspect Ratio Use this function to choose your desired aspect ratio.
• Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
• 4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
• 16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
• L. Box: Keep original signal aspect ratio and zoom in by 1.333
times.
Keystone Adjust image distortion caused by tilting projection. (±15 degrees)