Acer X183HV - Manual (Page 13)

EN-12
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1 Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2 Digital Cable (Only Dual-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer’s port.
Connect the power cord to the monitor, then to a properly grounded AC
This sequence is very important.
troubleshooting section to diagnose the problem.
3
3
Power-ON the monitor first, then power-ON the computer.
outlet.
3.Power-ON Monitor and Computer
4.If the monitor still does not function properly, please refer to the
2.Connect power cord