beautypg.com

Acer TA272HUL User Manual

English, Acer android all-in-one quick start guide

background image

English

Acer Android All-in-One Quick Start Guide

Important safety instructions

Please read the following instructions carefully.
1. To clean the Android All-in-One screen:

• Turn off the Android All-in-One and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the Android All-in-One near a window. Exposing the Android All-in-One to rain, moisture or sunlight can

severely damage it.

3. Do not apply pressure to the screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing

of any nature.

5. Store the Android All-in-One in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the Android All-

in-One outside this range may result in permanent damage.

6. Immediately unplug your Android All-in-One and call an authorized technician if any of the following circumstances

occur:

• Android All-in-One-to-PC signal cable is frayed or damaged.

• Liquid spills onto the Android All-in-One or the Android All-in-One is exposed to rain.

• The Android All-in-One or case is damaged.

Package contents

Please refer to the User Guide for information about setting up your Android All-in-One.

Turning on for the first time

You will asked some questions before you can use your monitor as a Android All-in-One. To set up or access a Google

account, connect your Android All-in-One to an Ethernet or Wi-Fi access point.

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power

cord.

2. Connect the signal cable to the DP (optional) and/or HDMI

(optional) input socket of the monitor, and the DP and/or HDMI

(optional) output socket of the graphics card on the computer.

Then tighten the thumbscrews on the signal cable connector.

3.

4.

Insert Android All-in-One power cable into the power port at

the back of the Android All-in-One.

Plug the power cords of your computer and your

Android All-in-One into a nearby electrical outlet.

Manufacture: Chicony Electronics Co., LTD.

Model:

A11-120P1A&A10-090P3A

Manufacture:
Model: ADP-90MD BB

Android All-

in-One

Power cord

HDMI cable

(optional)

USB cable

(optional)

AC Adapter

Quick start

guide

DP cable

(optional)

DELTA ELECTRONICS, INC.

User guide

HDMI

DP

USB

USB

USB3.0 port

HDMI

DP