Preset modes – Acer AL2202W User Manual
Page 7
E-6
AL2202W
PRESET MODES
To reduce the need for adjustment for different modes, the monitor has default setting
modes that are most commonly used as given in the table below. For optimum adjustment,
the user is suggested to perform the Auto Setup under Windows “Full Screen” pattern or
using the pattern in the floppy disk provided. When none of the mode is matched, the user
can store their preferred modes in the user modes. The monitor is capable of storing up to
9 user modes. The only condition to store as a user mode is the new display information
must have 1 KHz difference for horizontal frequency or 1 Hz for vertical frequency or the
sync signal polarities are different from the default modes.
Mode
Resolution
H. Freq.
(KHz)
Band Width
(MHz)
Polarity
H
V
1
VGA
720 x 400
70 Hz
31.47
28.322
-
+
2
VGA
640 x 480
60 Hz
31.47
25.175
-
-
3
VESA
640 x 480
75 Hz
37.50
31.5
-
-
4
VESA
800 x 600
60 Hz
37.88
40
+
+
5
VESA
800 x 600
75 Hz
46.88
49.5
+
+
6
VESA
1024 x 768
60 Hz
48.36
65
-
-
7
VESA
1024 x 768
75 Hz
60.02
78.75
+
+
8
MAC
1152 x 864
75 Hz
67.5
108
+
+
9
SXGA
1280 x 1024
60 Hz
64
108
+
+
10
SXGA
1280 x 1024
75 Hz
79.976
135
+
+
11
WSXGA
1680 x 1050
60 Hz
65.3
146.25
-
+