Image – Acer P1163 User Manual
Page 30
20
En
gl
ish
Image
Projection
(for X1163/X113 series only)
•
Front-Desktop: The factory default setting.
•
Rear-Desktop: When you select this function, the projector
reverses the image so you can project from behind a translucent
screen.
•
Rear-Ceiling: When you select this function, the projector reverses
and inverts the image at same time. You can project from behind
a translucent screen with ceiling mounted projection.
•
Front-Ceiling: When you select this function, the projector inverts
the image for ceiling-mounted projection.
Keystone
Adjust image distortion caused by tilting projection. (±40 degrees)(for
X1163/X113 series only)
Projection mode
(for X1263/P1163 series only)
•
Front: The factory default setting.
•
Rear: Reverses the image so you can project from behind a
translucent screen.
Projection Location (for X1263/P1163 series only)
•
Auto: Automatically adjusts projection location of image.
•
Desktop
•
Ceiling: Turns the image upside down for ceiling-mounted
projection.
Auto Keystone
Automatically adjusts vertical image. (for X1263/P1163 series only)