Acer P1373WB - Manual (Page 32)

32
En
gl
ish
1 Select AP Mode in the LAN/WiFi setting, and the projector plays an AP role.
You can tap "eDisplay" to see below splash screen.
Check Projector ID (if enabled, a 4-digit random number will display on the
upper-left corner of the screen), Projector Name (SSID, default name is
AcerProjector), Server IP (default is 192.168.100.10) and Security (default is
None).
2 Choose Client Mode in the LAN/WiFi setting and you will see below items.
Please connect to an available AP and input password if necessary.
Then splash screen displays with below information.
In Client Mode, you can project the screen from your tablet or smartphone
to the projector by using the application "eDisplay" and access to Internet
as well.
Projector Name(SSID) : AcerProjector001
WiFi IP : 192.168.100.10
Security : None (default)
LAN IP : 0.0.0.0 (if no LAN cable plugged in)
Connected AP Name(SSID) : Depended
Client IP : Depended
Security : Depended
LAN IP : 0.0.0.0 (if no LAN cable plugged in)