beautypg.com

En glish acer android all-in-one quick start guide – Acer DA223HQL User Manual

Page 3

background image

En

glish

Acer Android All-In-One Quick Start Guide

Important safety instructions

Please read the following instructions carefully.
1. To clean the Android All-In-One screen:

Turn off the Android All-In-One and unplug the power cord.

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the Android All-In-One near a window. Exposing the Android All-In-One to rain, moisture or sunlight

can severely damage it.

3. Do not apply pressure to the screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing

of any nature.

5. Store the Android All-In-One in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the Android All-

In-One outside this range may result in permanent damage.

6. Immediately unplug your Android All-In-One and call an authorized technician if any of the following circumstances

occur:
• Android

All-In-One-to-PC

signal cable is frayed or damaged.

Liquid spills onto the Android All-In-One or the Android All-In-One is exposed to rain.

• The

Android

All-In-One or case is damaged.

Package contents

Please refer to the User Guide for information about setting up your smart display.
Turning on for the first time
You will asked some questions before you can use your monitor as a smart display. To set up or access a Google account,

connect your smart display to an Ethernet or Wi-Fi access point.

Connecting your monitor to a computer

1. Turn off your computer and unplug your

computer's power cord.

2. Connect the signal cable to the MHL (optional)

and/or HDMI (optional) input socket of the
monitor, and the MHL (optional) and/or HDMI
(optional) output socket of the graphics card on
the computer. Then tighten the thumbscrews on
the signal cable connector.

3. Insert Android All-In-One power cable into the

power port at the back of the Android All-In-
One.

4. Plug the power cords of your computer and your

Android All-In-One into a nearby electrical outlet.
Manufacture: DELTA ELECTRONICS, INC.
Model: ADP-65JH DBA1
Manufacture: LITE-ON ELECTRONICS CO., LTD.
Model: PA-1650-10AM-LF

Smart Display

Power cord

MHL cable

(optional)

HDMI cable

(optional)

USB cable

(optional)

AC Adapter

Quick start

guide

DC

HDMI

HDMI