Braun C20S Independent Steam - Manual (Page 12)

Steaming
For perfect and long-lasting styling results, you can
apply steam.
To add steam to a tonged section of hair, press the
rubber ball on the top of the water reservoir for approx.
2–3 seconds. Steam will be released from the openings
of the tong, exactly giving the required amont of natural
moisture for a longer-lasting and healthier-looking style.
To achieve an optimal steam performance, we
recommend to set the temperature control at «max».
The steam function can be used with all attachments
(only with models C 70 TS, C 100 TS).
Using the rollers (model C 100 TS only)
Place one of the rollers
൸
onto the tong until it snaps
into place (the arrow in the direction of the ready
indicator). Wind the hair around the roller, release the
steam and hold for approx. 5–10 seconds (or as long as
the style requires). Then press the ribbed surfaces at the
top of the rollers to remove the tong. Secure the rollers
with the hair clamps. Wait for the hair to cool down and
then carefully remove the rollers.
Cleaning
For cleaning, make sure the appliance is switched off
and cold. Never immerse the appliance in water.
The tong, the handle and the protective cover can be
cleaned with a soft damp cloth if necessary.
The brush attachments, the protectiive cover and the
rollers can be cleaned in warm, soapy water.
3589165_C20S_D/GB/F Seite 10 Dienstag, 13. November 2001 6:53 06