AEG DB8040 - Manual (Page 16)

16
GB
GB
G
Safety advice
Read the following instruction
carefully before using machine for the
fi rst time.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to
ensure that they do not play with the
appliance.
• The appliance may only be connected
to a power supply whose voltage
and frequency comply with the
specifi cations on the rating plate!
• The iron is not to be used if it has been
dropped, if there are visible signs of
damage on the iron or its cord or if it is
leaking.
• The appliance must only be connected
to an earthed socket.
• If the appliance or the supply cord
is damaged, it must be replaced by
the manufacturer, its service agent or
similarly qualifi ed person, in order to
avoid hazard.
• The iron must be used and rested on a
stable surface. When placing the iron
on its stand, ensure that the surface on
which the stand is placed is stable.
• Never leave the appliance unattended
while connected to the supply mains.
• The appliance must be switched off
and the mains plug withdrawn each
time after use, before cleaning and
maintenance.
• The plug must be removed from
the socket outlet before the water
reservoir is fi lled with water.
• The mains cable must not come into
contact with any hot parts of the
appliance.
• Do not immerse the appliance in
water or any other liquid.
• Do not exceed the maximum fi lling
volume as indicated on the appliances.
• If there are limitations please defi ne
water quality / type of water that can
be used with appliance.
• This appliance is intended for
domestic use only. The manufacturer
cannot accept any liability for possible
damage caused by improper or
incorrect use.
Ironing chart
Fabric Temperature setting Ironing recommendation
Acrylic Dry iron on wrong side.
Acetate Dry iron on wrong side while still damp or use spray to dampen.
Nylon & Polyester Iron on wrong side while still damp or use spray to dampen.
Rayon Iron on wrong side of fabric.
Viscose Mainly dry iron. Steam can be used under manufacturer’s instructions.
Silk Iron on wrong side. Use an ironing cloth to prevent shine marks.
Cotton blends
Check label and follow manufacturer’s instructions. Use setting fo the fi bre
requiring lowest setting.
Wool & wool blends Steam iron on wrong side or use ironing cloth.
Cotton
Dry iron while still damp or use spray to dampen. Use steam medium to
high.
Corduroy Steam iron on wrong side or use ironing cloth.
Linen to “max”
Iron on wrong side or use ironing cloth to prevent shine marks, especially
with dark colours. Dry iron while still damp or use spray to dampen. Use
steam medium to high.
Denim to “max” Use maximum steam.
Varied ironing speed and fabric dampness might cause optimal setting to diff er from that recommended in the table!
AEG IFU 5Safety Mahe 19.07.11.indd 16 19.07.11 11:19