AEG DBS2300 - Manual (Page 25)

Getting started
GB
3. Fill the water tank using cold tap
water.
1. Carefully remove all packaging
materials. Position the steam
generator iron horizontally on the
ironing-board or on a heat resistant,
secure surface at the same height as
an ironing-board.
Unwind and straighten the power
cord and the steam cord.
2. Remove the water tank by gripping
the slot on the underside and pulling
it gently away from the base unit.
6. Insert the water tank into the base
unit. Ensure that the water tank
latches securely into place.
5. Always refill the water tank to MAX
level using cold tap water.
4. Empty the water tank to rinse out
any foreign particles which may
remain from the manufacturing
process.
25/30
D
GR
NL
F
GB
1
2
1
2
3