Evice, Nstallation – C2G 40312 DVI-D Monitor SPLITTER_EXTENDER User Manual
Page 7
6
One DVI-D male to male (M/M) cable i
s
required to connect from the Video Splitter
input to a computer’s DVI-D output. Multiple
monitors should be connected to the Video
Splitter’s output ports as shown below with
DVI-D cables.
The ACTIVE LED turns on when there is a
video signal at the Input port. The POWER
LED turns on when the Video Splitter is
powered up by the DC 9V power adapter.
Figure
1:
40312
Connection
Diagram
D
EVICE
I
NSTALLATION