C2G 28731 3-PLAY - Manual (Page 2)

INTRODUCTION
The Impact Acoustics™ 3-Play™ connects up to 3 TOSLINK
digital audio, 3 stereo analog audio pairs, and 3 composite video or
3 S-Video signals to a single composite or S-Video input.
Experience loss-less control from as many as 3 components! 3-
Play gives you the power of choice and the convenience of control!
This component is ideal for connecting DBS Satellite, Game
Consoles and DVD players to home theater receivers and pre-
amp/processors.
Note: Unit does not convert S-Video to Composite or Composite
to S-Video, the output signal is always the same as the input signal.
FEATURES
• 3 Inputs for composite video or S-Video, TOSlink Digital
Audio and Analog Stereo Audio
• Use for Video Game Systems, DVD Players and Satellite
Receivers
• Wireless IR Remote Control or front panel selection
• Compact size fits anywhere, only 9-1/2" x 4-1/4" x 2" (W x
D x H)
CONTENTS
• 3-Play Selector
• IR Remote Control w/Battery
• Power Adapter
INSTALLATION
1. Turn power off for all devices before making connections
2. Connect up to 3 composite or S-Video sources, 3 TOSlink
or 3 stereo audio sources
3. Connect the output to your television or display
4. Remove the protection tab from the remote control’s
battery
5. Turn the power on using the remote control or front panel
switch
6. Select the video input using the remote control or front
panel switch
NOTE: Audio signals may be combined but this unit does not
convert audio signals from analog to digital. If the source signal is
stereo audio the output will be stereo audio. If the source is
TOSlink the output will be TOSlink.