C2G 41314 Audio Unlimited Bluetooth Speaker - Manual (Page 5)

TROUBLE SHOOTING
No Sound

Ensure the AC adaptor is fully inserted into the AC outlet and the power connection input on the transmitter.

Ensure the speaker system and Bluetooth device has been paired up.

Ensure the speaker system is switched ON.

Ensure the TV or audio component is ON.

The connected audio / video equipment is not playing. Start playing the equipment.

The volume of speaker system is too low, adjust the volume to an appropriate level.
Distorted

Ensure the volume level of speaker is adjusted properly.

The speaker system is too far away from the Bluetooth device, move them closer.
TECHNICAL SPECIFICATIONS
Transmission Mode: Bluetooth® V2.1 + EDR
Carrier Frequency: 2.402~2.480GHz
Operation Voltage: Speaker, AC/DC 12V 1.0A Power Adaptor, or 6 X ‘AA’ size Alkaline Batteries (not included)
Frequency Response: 40Hz – 12KHz
Distortion: 1.5%
S/N Ratio: 65dB
Channel Separation: 30dB
Operation Distance: Up to 10 meters (open area)
Output Power: 2 x 3W (RMS)
WARNING:
1. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
2. This product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the
product.
3. Where the mains plug is used as the disconnect device for the product, the disconnect device shall remain readily operable.