AVSL 953.019 Z5M - Manual (Page 2)

Introduction:
Thank you for choosing this Citronic zoning mixer. The Z5M is a professional 1U mixer offering many features to give versatile
control for up to 5 stereo output zones. In order to achieve the best results from this equipment and avoid damage through
misuse, please read and follow these instructions and retain for future reference.
Warning:
To prevent the risk of fire or electric shock, do not expose any part of the unit to rain or moisture.
If liquids are spilled on the surface, stop using immediately, allow unit to dry out and have checked by qualified personnel before
further use.
Avoid impact, extreme pressure or heavy vibration to the unit.
There are no user serviceable parts inside the Z5M
– refer all servicing to qualified service personnel.
Safety

Check that the supplied mains lead is in good condition and the supply voltage is correct.

Ensure signal leads are of good condition and connected to appropriate inputs/outputs

Do not allow any foreign particles to enter the unit through control or connector apertures
Placement

Keep out of direct sunlight and away from heat sources.

Keep away from damp or dusty environments.

When rack-mounting, avoid placing heavy units above the unit and ensure all connectors and controls are accessible
Cleaning

Use a soft cloth with a neutral detergent to clean the casing as required

Use a soft brush to clear debris from the control surface

Do not use strong solvents for cleaning the unit.
Front Panel
Rear and Side Panels
6. LINE 2 left & right inputs (balanced XLRF)
7. LINE 1 left & right inputs (balanced XLRF)
8. ZONES 1 to 5 left & right outputs (balanced XLRM)
9. IEC mains inlet and fuse
10. Side panel voltage switch
1. POWER switch and indicator
2. LINE 1 source volume controls per channel
3. MONO mode switch and indicator
4. LINE 2 source volume controls per channel
5. LINE 1 and 2 signal indicators