AVSL 103.153 KA-5.1 - Manual (Page 3)

AV remote control has the same functions as the buttons on the amplifier. All the functions have been marked with the
same number as the amplifier buttons.
HOW TO CONNECT:
1. Centre
2. Subwoofer
3. Front Left
4. Front Right
5. Rear Left
6. Rear Right
7. TV
SPECIFICATION:
Output power: 2X30W + 3x9W Max
Minimum impedance: 4 Ohm
S/N ratio:
＞70dB
Power supply: 230-240V AC/50Hz
1. Power switch On/Off 24. VCD audio source selection
2. MUTE Temporary sound cut 25. CD audio source selection
3. Automatic search for connected audio source 26. AUX audio source selection
4. Tone control for voice 27. Treble control
5. Microphone volume 28. Bass control
6. Master volume control 29. Left/Right sound control
7. Microphone input 1 (6.3mm Jack) 30. AUX stereo input
8. Microphone input 2 & 3 (6.3mm Jack) 31. CD stereo input
9. Digital VU Displays 32. VCD stereo input
10. Pre-programmed DSP settings 33. AC-3 front left audio source input
11. Volume control for the subwoofer 34. AC-3 front right audio source input
12. Volume control for left rear speaker 35. 5.1 rear left audio source input
13. Volume control for center speaker 36. 5.1 rear right audio source input
14. Volume control for right rear speaker 37. 5.1 front middle audio source input
15. Selection of the connected speakers 38. Subwoofer audio input
16. VU-meters display modes 39. Active subwoofer audio output
17. Microphone delay 40. Speaker front, front right output
18. On/Off switch for loudness 41. Speaker front, front left output
19. Echo + delay control 42. Center/surround, rear right output
20. High frequency microphone sound 43. Center/surround rear left output
21. Low frequency microphone sound 44. Center/surround middle output
22. Microphone on/off control 45. AC power input
23. AC-3 audio source selection 46. Stand by switch