AVSL 154.102 DMX-D8 User Manual

Page 2

154.102UK User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Introduction

8 way DMX Booster/distributor with one input, loop through and four pairs of electrically opto-isolated outputs.
Both DMX input and DMX output are provided with 3 pin XLR connectors, making it universally compatible with most

lighting systems. This item is ideally used for splitting the signal over a large area or to isolating individual fixtures
making it quick and easy to diagnose and fix faulty fixtures without the whole system failing.



DMX Loop out or DMX terminated (supplied)



8 x opto isolated DMX outputs (isolated in pairs, CH1+2, CH3+4, CH5+6, CH7+8)



Circuit Diagram

Warning: Before Use

This item is for professional use only. Please take note of the following instructions before using this device.



This unit must be earthed.



Do not turn on the power until all connections are securely made.



The DMX-D8 will not work if 32 or more fixtures are connected

before

it in the chain



The DMX-D8 should not be connected to more than 32 fixtures per channel



Always use a DMX terminator at the end of each DMX chain



If the DMX-D8 is last in a DMX chain, switch in the internal DMX terminator



Always disconnect from the mains before replacing the fuse



There are no user serviceable parts inside

Specifications

Power supply

230Vac, 50Hz (IEC)

DMX input

1 x XLRM

DMX Outputs

8 x XLRF (+ loop output)

Isolators

4 (with paired outputs)

Dimensions

280 x 180 x 75mm

Weight

2.3kg

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.