AVSL 130.000 NAUHF-A30 User Manual

Page 4

130.000UK User Manual

CONNECTION:

Ensure both power supply and TV are switched off and unplugged. Connect the antenna port of the
power supply to the antenna, use the water proof boot supplied to cover the terminal if the installation
is outdoors. Then connect the TV port of the power supply to the set top TV receiver, for a TV with
digital TV ready, it can be plugged into the TV directly.

After finishing mounting the antenna, adjust the position of the antenna until the best picture and
sound quality is achieved (Usually facing the direction of the transmitting tower), fix the antenna at its
best receiving position, then cable management can be performed to improve overall appearance and
avoid tripping over.
Please note, for best reception:

Keep the antenna away from high power appliances such as air con, hair dyer, microwave
oven etc.

For indoor installation, please position the antenna as close to window as possible.

Position antenna at the highest possible location, as blockage in line of sight between
antenna and transmission tower may cause signal lost, having the antenna installed at
highest possible location will minimize the chance of signal blockage.

This product is classed as Electrical or Electronic equipment and should not be disposed with other

household or commercial waste at the end of its useful life. The goods must be disposed of according

to your local council guidelines.

Errors and omissions excepted.