Amerock Knob & Pull - Manual (Page 2)

A. Mounting Pulls
Sizes Available
Pulls can be obtained in U.S. measurements as well as metric.
Amerock offers a broad range of sizes to choose from.
How to Choose the Right Size
• Take note of all sizes available.
• 3" is the most common size pull.
• Size is determined by measuring from hole to hole,
not by the length of the pull itself
Installation Tips
If you are using a pull, you will want to determine the hole center spacing of the pull. 3" hole centers are the most common,
however, Amerock offers a wide variety of sizes. You may want to create or purchase a durable template prior to drilling to
mark the mounting holes. This will help to ensure that they are parallel with the door or drawer edge and that they are the
same placement height on every cabinet. WARNING! An example is provided below, however, do not use this for drilling
purposes as printers may provide template distortions.
Common
Hole Center
Measurements
B. Mounting knobs
Sizes Available
Knobs can be obtained in a variety of sizes, shapes, and diameters. Amerock offers a broad range of sizes to choose from.
How to Choose the Right Size
There are no right or wrong sizes when it comes to selecting the appropriate knob size. Choose the size that looks best in
proportion to the size of your cabinet doors and drawers. A 1-1/4" or 1-3/8" diameter knob is the most popular.
To create a dramatic effect, consider using a large (1-1/2" diameter or greater) or small (1" diameter or smaller) sized knob.
Small sized knobs also work well on applications such as apothecary drawers, spice drawers, pullout cutting boards, etc.
Installation Tips
If you are installing a knob, it is suggested that you create or buy a durable template prior to drilling to mark the mounting hole.
This will help to ensure that the knob is positioned properly on the cabinet door or drawer front and that there is the same
placement height on every cabinet.
2-1/2 in.
2-3/4 in.
3 in.
3-1/4 in.
3-1/2 in.
96 mm
4 in.
128 mm