beautypg.com

Air Suspension A-2105 REV 2 User Manual

Page 3

background image

3

A-

2105

ARNOTT REAR AIR SPRING

FOR

1990-2011

LINCOLN TOWN CAR

FOR

1992-2011

FORD CROWN VICTORIA/

MERCURY GRAND MARQUIS

A-2105

REV 2

01/17/2014

AIR SPRING INSTALLATION

1.

CHANGE O-RINGS ON THE AIR SPRING SOLENOID.

2.

INSTALL SOLENOID, AND REPLACE SOLENOID RETAINING-CLIP.

3.

REPLACE THE TOP AIR SPRING RETAINING-CLIP.

4.

CLIP THE BOTTOM OF THE AIR SPRING PISTON TO THE AXLE.

AIR SPRING.

5.

REPLACE TIRE AND WHEEL ASSEMBLY. TIGHTEN WHEEL HUB BOLT NUTS TO 115-142 N-M (85-105 LB-FT).

6.

REMOVE ALL SAFETY STANDS AND LOWER VEHICLE.

7.

TURN THE AIR SUSPENSION SWITCH BACK TO THE ON POSITION, AND START VEHICLE. VEHICLE SHOULD

RISE BACK TO FACTORY TRIM HEIGHT.

Tighten all nuts and bolts to manufacturer's specifications during the installation process.

IT IS VERY IMPORTANT TO MAKE SURE THE PISTON IS CLIPPED IN AND SECURE BEFORE
INFLATING OR PRESSURIZING AIR SPRING.

NOTE: