Air Suspension P-2655 REV 1 - Manual (Page 6)

6 REV 1 01/14/2014 P-2655
P- 2655
AMK OES AIR SUSPENSION COMPRESSOR
FOR 2007-2013 BMW X 5 (E 70 CHASSIS)
FOR 2009- PRESENT BMW X 6 (E 71 CHASSIS)
3. REMOVE THE COMPRESSOR FROM THE MOUNTING BRACKET. REMOVE THE LARGER RUBBER HOSE AND
THREE (3) MOUNTING STUDS AND INSTALL THEM ONTO THE NEW COMPRESSOR. (FIGURE 20-3)
4. REMOVAL COMPLETE.
FIGURE 20-3
AIR SUSPENSION COMPRESSOR INSTALLATION
1. INSTALL THE NEW COMPRESSOR ONTO THE VEHICLE IN THE REVERSE ORDER OF REMOVAL USING THE
HARDWARE PROVIDED.
AIR SUSPENSION COMPRESSOR ASSEMBLY INSTALLATION
1. INSTALL THE COMPRESSOR ASSEMBLY BACK INTO THE VEHICLE IN THE REVERSE ORDER OF REMOVAL.
Tighten all nuts and bolts to manufacturer's specifications during the installation process.
Do not remove the air fitting from the air suspension compressor. Doing so may cause damage and/or void warranty.
Remove the white shipping pin from the air new air fitting and insert the air line until fully secure.
Tighten all nuts and bolts to manufacturer's specifications during the installation process.