Air Suspension A-2464 REV 5 User Manual
Page 4
4
A-
2464
ARNOTT FRONT RIGHT AIR SPRING
FOR
2000-2006
BMW X
5
REV 5
02/17/2014
A-2464
4.
REMOVE THE TWO (2) O-RINGS AND TWO (2) BACK-UP RINGS FROM THE TOP OF THE SHOCK SHAFT AND
DISCARD. (FIGURE E)
5.
INSTALL THE NEW ARNOTT® AIR SLEEVE ASSEMBLY ONTO SHOCK WITH THE ALIGNMENT PIN IN THE
SAME ORIENTATION AS THE OLD AIR SPRING. APPLY A SILICONE BASE LUBRICANT ON THE LOWER
O-RINGS PRIOR TO INSTALLING AIR SLEEVE ASSEMBLY. (FIGURE F)
6.
SLIDE AIR SLEEVE ASSEMBLY ONTO THE SHOCK UNTIL LOWER PISTON SEATS ONTO THE 2 (TWO) LOWER
O-RINGS. ALIGN THE HOLE IN THE ALIGNMENT TAB ON THE PISTON WITH THE HOLE ON THE SHOCK,
REINSTALL THE PLASTIC RETAINING PIN. FAILURE TO DO SO MAY CAUSE THE AIR SLEEVE ASSEMBLY TO
NOT SEAL OR INFLATE. (FIGURE G)
FIGURE E
FIGURE F
FIGURE G
- A-2730 REV 1 (8 pages)
- A-2731 REV 1 (9 pages)
- SK-2716 REV 1 (6 pages)
- A-2239 REV 4 (7 pages)
- C-2130 REV 10 (13 pages)
- A-2133 REV 6 (9 pages)
- SK-2717 REV 1 (7 pages)
- P-2134 REV 5 (6 pages)
- AS-2744 REV 1 (6 pages)
- AS-2743 REV 1 (6 pages)
- AS-2561 REV 7_W CORE TOP (6 pages)
- AS-2563 REV 7_W CORE TOP (6 pages)
- P-2539 REV 5 (7 pages)
- AS-2560 REV 7_W CORE TOP (6 pages)
- AS-2562 REV 7_W CORE TOP (6 pages)
- C-2616 REV 1 (15 pages)
- A-2572 REV 4 (10 pages)
- A-2571 REV 4 (10 pages)
- P-2496 REV 3 (7 pages)
- A-2523 REV 5 (8 pages)
- P-2740 REV 1 (10 pages)
- AS-2581 REV 1 (6 pages)
- AS-2580 REV 1 (6 pages)
- P-2469 REV 3 (6 pages)
- P-2658 REV 1 (6 pages)
- A-2755 REV 1 (4 pages)
- AS-2306 REV 2 (4 pages)
- P-2494 REV 5 (6 pages)
- A-2465 REV 5 (5 pages)
- A-2502 REV 2 (4 pages)
- A-2504 REV 2 (4 pages)
- A-2501 REV 2 (4 pages)
- A-2503 REV 2 (4 pages)
- AS-2305 REV 2 (4 pages)
- P-2655 REV 1 (7 pages)
- A-2642 REV 1 (5 pages)
- A-2384 (3 pages)
- P-2136 REV 4 (5 pages)
- A-2610 REV 2 (3 pages)
- 93,96-CR Cadillac Front/Rear Shock Kit (7 pages)
- 93,96,97-CF Cadillac Strut (4 pages)
- 93,96-CR Cadillac Rear Air Shock Kit (4 pages)
- AS-2708 REV 1 (4 pages)
- C-2532 (9 pages)